How to Use an Automatic Needle Threader (See video)

As an Amazon Associate I earn from qualifying purchases.

process of using automatic needle threader

To get hassle-free threading, a needle threader is an ultimate weapon for you. Especially, this tiny kit is more helpful for small eye people.

Typically, it makes your work easier by creating a loop. You have to pass the loop through the eye of the needle and the string. After that, you have to pull it to get the desired threading.

This amazing concept was first invented in the mid of eighteenth in Europe. But in the modern era, the demand for quality needle threaders is increasing day by day.

We can classify it into two categories:

  • Conventional needle threader
  • Automatic needle threader

The amazing fact is both of these items are pretty easy to use. But sometimes the newbies get trouble using an automatic needle threader.

That’s why this content, we sharing the trick of how to use an automatic needle threader (step by step with the simplest way).

Read this article if you are looking for the best automatic needle threader that makes your job more easier and faster.

Let’s see how to operate an automatic needle threader:

Step 1: Keep the needle at the highest position

Initially, you need to raise the needle completely. The fact is without picking it on the highest position you cannot ensure precise performance.

You can lower the presser foot a bit to get extra flexibility.

Step 2:

Now, push the threader lever downwards and wrap the thread over the elbow-shaped bracket. After that pass this thread to the cage to reach it into the hook.

Step 3:

Finally, you can release this level and pull up the loop (through the needle eye).

Now let’s see when you should not use a needle threader:

Most of the case for any decorative stitches (when you are using special needles), you cannot use this kit. You can use this item when the needle size is 5/11- 100/16.

That means always you have to focus on the thread combination.

Also, you have to keep in mind the following aspects:

Fact 1:

Usually, the auto threader works as a lever. It locates on the upper left portion of the needle. That’s why your initial step is checking the machine’s manual to ensure the placement.

Fact 2:

Before starting a project you have to change the thread color and other settings.

Fact 3:

Make sure that the thread is not twisting


Yes! Now a day the self-threading sewing machines are getting popular that makes your work easier and faster as well.

The best part is these types of machines can easily release the lever and ensure proper threading. Still, the newbie can face trouble threading with the auto threader.

That’s why follow our given guidelines and take quality tools including good thread and needle to ensure hassle-free performance.

FAQ (Frequently Asked Questions):

Q: How to fix a damaged self-performing needle threader?

To repair an auto needle threader you need to know the diagram of this machine and its working principle.

The maximum auto threader has almost the same working principles. Most of the threaders come with a release lever. Some advanced level models are fully automated that includes a push button and the thread lies in places.

However, to fix the error you can do the following steps:

Checking the needle position:

Initially, make sure that the needle eye place at the lever properly to pass the wire hook easily. Also, turn the needle into the highest position.

Avoid using any tiny needles:

Usually, the small needles (less than 70/10) are quite difficult to set. You will face trouble to accommodate its hook and there is a big chance of damage. Often it causes a scratch on the needle’s eye and leads to stitching problem.

That’s why for smooth threading always choose a proper size needle.

Use appropriate thread:

Apart from a quality needle, you should also use a proper thread. In this case, you have to keep in mind the garment construction and concern about the needle and thread composition.

Avoid thread tension:

For proper threading, the best option is always to avoid thread tension and maintain proper timing. However, sometimes hook cannot get back into the right position.

In this case, better to take it to repair soap or ask an expert’s advice.